DOP Testing , Particle Count Testing , Air Flow Pattern Visualization Testing

Cleanroom Projects , Air Curtains , Air Showers , Biological Safety Cabinets Class - I , Class - II , Class - II Type A/B , Class - II Type B1 , Class - II Type B2 , Class - II Type B3 , Class - III , Cleanroom Garment Storage Cabinets , Horizontal Laminar Air Flow , Vertical Laminar Air Flow , Powder Dispensing / Sampling Booths , Positive Pressure Modules , Soft wall Cleanrooms  , Static Pass Box , Dynamic Pass Box

Class-I Biological Safety Cabinets / Bio Hazard Safety Cabinets

Bio safety cabinets are available in Stainless steel and GI with PU coated construction. Worktables are of removable type and suitable for oven baking. Inner surface are completely line with stainless steel. HEPA filters are of Minipleat type. Differential pressure is monitored through specially designed low-pressure gauges. Working chamber is provided with UV & Illumination tubes. Feather-touch control switch with indicators are provided for the operations of Blower / Illumination / UV - Ultra Violet Lamp

Biosafety cabinets are available with various optional Special features such as VFD controlled air-blowers for adjustable airflow, Operation of UV - Ultra Violet Lamp integrated with the front-door movement to avoid accidental exposure to UV - Ultra Violet rays, warning alarm when differential pressure exceeds the limit to indicate filter choking level, warning alarm when the front sash is opened beyond safety-level

Biosafety cabinets are available in various standard sizes and custom-built sizes to suit user's requirement

Biosafety Cabinet Class - I

Recommended for personnel & Environmental protection only

Class I Biosafety Cabinet is defined as a totally enclosed, ventilated unit of airtight constructions. The front panel can be opened, allowing room air to enter the cabinet, sweep the inner surfaces, and exhaust-out through the duct. A front sash with glove ports may be installed. If glove are installed, air is drawn through a secondary opening equipped with a primary filter. A laboratory hood could be considered a class I BSC, the exhausted air is passed through HEPA filter before released in to the atmosphere. The Cabinet unit is maintained under negative pressure.

Note - Optionally ULPA filters can also be fitted to acheive ISO Class 3 air cleanliness within workzone as per ISO 14644-1 (Equivalent to Class 1 air cleanliness as per US Federal Standard 209E, 100 times better than the usual class 100 air cleanliness classification)