We Provide Services like DOP HEPA Filter Integrity Test for cleanrooms, DOP Test for AHU's, DOP Test for laminar Air Flow Cabinets, DOP Test for Biological Safety Cabinets, dioctyl phthalate HEPA Filter Integrity Test, HEPA filter itegrity test using PAO, DOP TEst for Sterilising Tunnels, DOP Test for Dry Heat Sterilisers, Laser Particle Count Testing for Clean Rooms, Laser Particle Count Testing for Terminal HEPA Filters, Particle Count Testing for Cleanroom Classification, Air Flow Pattern Visualization test for cleanrooms, Air Flow Visualisation test for HEPA filtes using US FDA approved smoke generator, Cleanroom Pressure Balancing, Temperature Measurements, Air Changes Calculation in Clean Rooms, Air Velocity Measurements in Cleanrooms and LAF Units and etc...
 New No.3, Appaiar Lane, Second Floor, Royapuram, Chennai - 600 013, Tamilnadu, India
 Email - enquiry@multilab.biz, Tele Fax - +9144 52173177,  Mobile - +91 94441 62346    
Language    Search
  Cleanrooms Laboratory
  Pharmaceutical Testing



Cleanrooms  > Reverse Flow Class 100 Powder Dispensing / Sampling Booths / Open Fronted Powder Containment Booths ( Pharmaceutical Application )
 

Bag Filters , Fancoil Filters , Fine Filters, Air Cleanable Type Pre Filters, Laminar Air Flow Pre Filters, Water Washable Type Pre Filters, Metallic Viscous Pre Filters, HEPA Filters , Mini-Pleat HEPA Fiters, ULPA Filters

DOP Testing , Particle Count Testing , Air Flow Pattern Visualization Testing

Cleanroom Projects , Air Curtains , Air Showers , Biological Safety Cabinets Class - I , Class - II , Class - II Type A/B , Class - II Type B1 , Class - II Type B2 , Class - II Type B3 , Class - III , Cleanroom Garment Storage Cabinets , Horizontal Laminar Air Flow , Vertical Laminar Air Flow , Powder Dispensing / Sampling Booths , Positive Pressure Modules , Soft wall Cleanrooms  , Static Pass Box , Dynamic Pass Box



Reverse Flow Class 100 Powder Dispensing / Sampling Booths / Open Fronted Powder Containment Booths ( Pharmaceutical Application )


Powder containment booths are used to control the hazardous emissions of powders, dust or vapors during powder dispensing, product sampling, or bag dispensing, etc., without risk to the operator or environment. The downdraught prevents airborne dusts caused by weighing and dispensing operations rising into the operator's breathing zone.

The air forced downwards is extracted at low level into the booth's filtration system where dust particles are contained at each level of filtration prior to being re-circulated back into the booths' air stream.

Air balancing 90% Re circulation and 10% exhaust
Cleanliness Class 5 air cleanliness as per ISO 14644-1 , Class 100 air cleanliness as per US Federal Standard 209E
Particle Retention  0.3 Micron & Above
Noise Level   65 decibel on "A" scale ± 5
Velocity 90 Feet/Minute ± 20
Differential pressure By Magnehelic Gauge 0-25 mm
Illumination By Florescent Tubes with Diffusers
Power Supply 230V single phase, 50 Hz

Available in different sizes with following material of construction

* Full Stainless steel construction with polished finish
* In GI construction with oven baked PU paint finish
* In ply-lam construction