Product Description:
In protective coating applications there is a requirement to measure surface roughness.
Measurements of Surface Roughness are expressed in terms of Ra, Rz or Tp. These values include peak-to-valley profile measurement in combination with an assessment of the frequency of peaks within the sample area.
The Elcometer 7061 is a light weight and portable measuring solution for the range of surface roughness measurements required for compliance to International Standards.
The unit is also suitable for assessing surface roughness conditions in a wide range of general industrial applications; particularly where the sample is too large to bring to the laboratory.
- Multi-Lingual Display: All the required information is displayed on screen in a choice of 14 languages.
- Flexible: Can be used in virtually any position; horizontally, vertically, upside down. A height adjustment accessory to accommodate various sample sizes is supplied with each gauge as standard.
- Integrated Calibration Standard: No external calibration standard is required; provides greater ease of use.
- Drive Unit: Can be rotated and moved longitudinally; enables the stylus pick-up to be moved to the calibrating position. The stylus pick-up is also protected for transport in this position.
- Stylus pick-up with removable protection: 2?m (80?in) diamond stylus tip with a measuring force of 0.7 mN. Different stylus’ are available for various applications.
Technical Specification :
| Part Number |
Description |
| K7061M001 |
Elcometer 7061 MarSurf PS1 Surface Roughness Tester |
| Unit of Measurement |
Metric, inch |
| Measuring Principle |
Stylus Method |
Stylus Pick-Up Supplied
(Other stylus pick-ups are available) |
Inductive skidded stylus pick-up, 2µm (80µin) stylus tip, measuring force approx. 0.7 mN |
| Parameters |
24 (with tolerance limits): Ra, Rq, Rz equiv. to Ry (JIS), Rz (JIS), Rmax, Rp, Rp (ASME),
Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr equiv. to Tp (JIS,
ASME), RSm, R, Ar, Rx |
| Measuring range |
350µm, 180µm, 90µm (changes automatically) |
| Profile resolution |
32nm, 16nm, 8nm (changes automatically) |
| Filter† |
Phase-correct profile filter (Gaussian filter) according to DIN EN ISO 11562, special filter
according to DIN EN ISO 13565-1, ls filter according to DIN EN ISO 3274 (can be disabled) |
| Cutoff lc† |
0.25mm, 0.8mm, 2.5mm; automatic (0.010”, 0.030”, 0.100”) |
| Traversing length Lt† |
1.75mm, 5.6mm, 17.5mm; automatic (0.069”, 0.22”, 0.69”) |
| Traversing length (acc. to MOTIF) |
1mm, 2mm, 4mm, 8mm, 12mm, 16mm (0.040”, 0.080”, 0.160”, 0.320”, 0.480”, 0.640”) |
| Short cutoff† |
Selectable |
| Evaluation length ln† |
1.25mm, 4.0mm, 12.50mm (0.050”, 0.15”, 0.50”) |
| Number n of sampling lengths† |
Selectable: 1 to 5 |
| Calibration function |
Dynamic |
| Memory capacity |
Max. 15 profiles, max. 20,000 results |
| Other functions |
Blocking of settings (code-protected), date/time |
| Battery |
Li-ion battery |
| Interfaces |
USB, MarConnect (RS232) |
| Dimensions |
140mm × 50mm × 70mm (5.51” × 1.97” × 2.76”) |
| Weight |
400g (0.88lbs) |
| Long-range power supply |
100V to 264V |
| Packing List |
Elcometer 7061 MarSurf PS1 base unit, drive unit, 1 x standard stylus pick-up, built-in
battery, roughness standard integrated into casing, height adjustment accessory, stylus
pick-up protection, universal charger / mains adapter, USB cable, carry case with shoulder
strap and belt loop, calibration certificate and operating instructions |
† According to ISO/JIS
Can be used in accordance with:
ASTM D4417, ASME B46, DIN 4768, EN 10049, ISO 4287, ISO 4287/1, JIS B 0601
Standards in grey have been superceded but are still recognised in some industries.
Accessories :
| ELCOMETER 7061 STYLUS PICK-UPS |
| Part Number |
Description |
| KT007061P001 |
Stylus pick-up Extension; 80mm (3.15”)
Ideal for measuring points located deep within cylinders |
| KT007061P002 |
Stylus pick-up PHT 3-350
For measurements in bores from 3mm (0.12”) diameter |
| KT007061P003 |
Stylus pick-up PHT 11-100
For measurements at recessed measuring points, e.g. in grooves from 2.5mm (0.10”) wide and up to
7.5mm (0.30”) deep |
| KT007061P004 |
Stylus pick-up PHTR 100
For measurements on concave and convex surfaces |
| KT007061P005 |
Stylus pick-up PHTF 0.5-100
For measurements on tooth flanks |
| KT007061P006 |
Stylus pick-up PT 150
Dual-skid stylus pick-up for measurements on metal sheets and roller surfaces according to DIN EN
10049 (SEP) |
| KT007061P007 |
Stylus pick-up PHT 6-350 |
| KT007061P008 |
Stylus pick-up PHT 6-350, 5?m Probe Tip
For measurements on flat planes, in bores from 6mm (0.24”), 17mm (0.67”) deep and in grooves
from 3mm (0.12”) wide |
| MISCELLANEOUS ACCESSORIES |
| Part Number |
Description |
| KT007061P010 |
Measuring Stand ST-D |
| KT007061P012 |
Measuring Stand Mount - Required to fix the Elcometer 7061 to the measuring stand |
| KT007061P011 |
End Face Vee-Block - For measuring on flat faces of cylindrical and planar components |
| KT007061P013 |
Adapter Set for Transverse Tracing; Comprising of Adapter for Transverse Tracing and Vee-Block Holder with
Vee-Block - For hand-held transverse tracing of cylindrical measuring objects |
| KT007061P016 |
MarSurf PS1 Explorer Evaluation Software |
|
