Product Description:
Elcometer 122 Testex Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile, which can then be measured using the Elcometer 124 Thickness Gauge.
Elcometer 122 Testex Tape is available in three profile ranges. It is important that the tape grade chosen is reflective of the profile being measured, as using tape grade below the actual value may provide a “false” reading.
There are 50 tests in each roll.
Technical Specification :
| Description |
Profile Range |
Part Number |
| 1 Roll |
Pack of 10 |
Pack of 50 |
Pack of 100 |
| Elcometer 122 Coarse |
20 - 64µm (0.5 - 2.5mils |
E122----B1 |
E122----B10 |
E122----B50 |
E122----B100 |
| Elcometer 122 X-Coarse |
38 - 115µm (1.5 - 4.5mils) |
E122----C1 |
E122----C10 |
E122----C50 |
E122----C100 |
| Elcometer 122 X-Coarse Plus |
116 - 147µm (4.6 - 5.8mils) |
E122----F1 |
E122----F10 |
E122----F50 |
E122----F100 |
Can be used in accordance with:
ASTM D 4417-C, BS 7079-C5, ISO 8503-5, NACE RP0287, US Navy NSI 009-32, US Navy PPI 63101-000
Standards in grey have been superseded but are still recognised in some industries.
|
