Elcometer 224 Digital surface profile gauge available with Blutooth, with OR without memory supplied by multilab india from Multilab, India

Product Description:
The Elcometer 224 provides the very latest in surface profile measuring technology. Accurate, fast and very user friendly, this gauge is available with or without memory. The Elcometer 224 Top model is available with wireless technology and can store up to 50,000 readings in 999 batches.

• Fast reading rate at 40+ readings per minute.
• Accurate, immediate and repeatable results.
• Intuitive menus in multiple languages enables use straight from the box.
• Large backlit screen makes viewing readings easy.
• Digital display prevents reading interpretation errors.
• Measure profiles upto 500µm (20 mils) in a single gauge.
• Tough tungsten carbide user replaceable tip, can be used for up to 20,000 readings.
• Counted average mode stores the average value of a preset number of readings.
• Statistics are calculated and displayed in real time.
• Readings can be downloaded to a PC and reports created in seconds.
• Store upto 50,000 readings in 999 batches.
• Bluetooth® wireless technology & RS232 data output for cable free data transfer.
• Cost per test is significantly lower than other test methods.

Elcometer 224 S Digital Surface Profile Gauge

The Elcometer 224 S Digital Surface Profile Gauge provides an accurate way to measure surface profiles in microns and mils and is an ideal gauge for checking the quality of the surface profile.

The gauge displays statistical values as readings are taken, giving rolling statistics. The intuitive menu system, in over 20 languages, makes this gauge user friendly.

The tungsten carbide tip will last for up to 20,000 readings and can then be easily replaced by the user in the field.

Elcometer 224 T Digital Surface Profile Gauge

The Elcometer 224 T works in the same way as the Elcometer 224 S, but has the advantage of a large inbuilt memory to accurately record each measurement and offers Bluetooth® wireless technology for cable free data transfer.

The memory is able to store up to 50,000 readings in 999 batches. This enables readings to be automatically stored - ideal for measuring large surface areas.

A statistical analysis is also displayed on the gauge and stored within each batch. Data can be downloaded to a PC and, using the ElcoMaster™2.0 Software, which is supplied free of charge with this gauge, detailed reports can be created in seconds. Data can also be transferred to a spreadsheet. With the supplied ElcoMaster™ & ElcoMaster™ Mobile Software, you are able to e-mail data directly to the office from the field with a PDA.

The Elcometer 224 T operates in one of three modes; immediate, batch or counted average.

• Intermediate mode: Takes readings an calculates statistics but does not store any readings in the memory (this is known as rolling statistics).
• Batch mode: Takes measurements and stores the individual readings and the statistical analysis in the memory. Batch mode, or batching, allows data to be collected in groups to allow easier analysis of large or complex structures. The Elcometer 224 T has the memory capacity for a total of 50,000 readings in up to 999 batches.
• Counted average mode: Automatically calculates the average value of a pre-determined number of readings. Each of these averages is recorded within the batch and stored in the memory.