 Download Full Catalog
Product Description :
These stainless steel combs are wire eroded to provide an accuracy of ±2.5µm (0.01mil) and are supplied with either Metric or Imperial measurements.
Each comb has 24 measurement stages (teeth) providing a more accurate wet film thickness value.
Using a wet film comb
Place a comb perpendicular to and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are wet. Remove the comb from the film. The wet film thickness lies between the biggest value ‘coated’ or ‘wet’ tooth and the smallest value ‘uncoated’ or ‘dry’ tooth.
Technical Specification :
| Part Number |
Range |
Steps
|
| K0003238M201 |
5 – 120µm |
5µm |
| K0003238M202 |
25 – 600µm |
25µm |
| K0003238M203 |
50 – 1200µm |
50µm |
| K0003238M204 |
Set of 3 Wet Film Combs - Metric* |
| K0US3238M201 |
0.5 – 6mils |
0.5mil |
| K0US3238M202 |
1.0 – 24mils |
1.0mil |
| K0US3238M203 |
2 – 48mils |
2.0mil |
| K0US3238M204 |
Set of 3 Wet Film Combs - Imperial* |
| Dimensions |
60 x 30 x 2mm (2.36 x 1.18 x 0.08”) |
| Weight |
27g (0.95oz) per comb |
| Certificate available |
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability.
Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory. |
| Packing List |
Wet Film Comb, storage case and operating instructions |
*Set comprises of one of each scale 1, 2 and 3.
Can be used in accordance with:
ASTM D 4414-A, AS/NZS 1580.107.3, BS 3900-C5-7B, ISO 2808-1A, ISO 2808-7B,
JIS K 5600-1-7, NF T30-125, US NAVY PPI 63101-000, US NAVY NSI 009-32
Standards in grey have been superseded but are still recognised in some industries.
Download Full Catalog
|
