|
Product Description:
The Elcometer 3025 is a motorised device to test the resistance of many materials to scratching, shearing, gouging, marring, scraping and engraving. This portable instrument tests materials up to 12.7mm (½”) thick by 101mm (4”) square or round.
The height of the scale beam is adjusted by the user to match the thickness of the sample. The tool, a conical diamond tip, is then placed on the sample and the instrument is activated by the user with the On/Off switch.
The tip leaves a trace mark and the extent of this, in relation to the load used, indicates the degree of hardness.
The turntable rotates at a constant 5rpm to ensure repeatability and reproducibility of tests. By changing the load on the tool, from 0 - 1000g (0 - 2.2lb), the sample’s resistance to deformation can be evaluated.
Technical Specification:
Part Number
|
Description |
| UK 240V |
EUR 220V |
US 110V |
| K0UK3025M001 |
K0003025M001 |
K0US3025M001 |
Elcometer 3025 Scratch/Shear Tester |
| Dimensions |
445 x 190 x 150mm (17 x 7.8 x 6”) |
| Weight |
6.8kg (14.9lb) |
| Packing List |
Elcometer 3025 and operating instructions |
Can be used in accordance with:
EN 438-2, ISO 4586-2
Accessories:
| |
Sample Cutter |
 |
The Sample Cutter cuts precise 106mm (4.2”) circular samples with a 6.35mm (0.25”) centre hole to prepare specimens for use with the Taber® Abrasers.
An easy counter-clockwise cutting motion allows the user to cut a variety of materials. Optional pads allowing cutting thicknesses of 0.03mm (0.001”), 4.74mm (0.187”) and 6.35mm (0.25”) are available. |
| ST985000 |
Sample cutter |
| ST131569 |
Sample Cutter Upper Pad – 4,74mm (0,187”) |
| ST131570 |
Sample Cutter Upper Pad – 6,36mm (0,250”) |
| KT003025P007 |
Magnifier (x10) |
 Download Full Catalog
|
