|
Product Description:
Using the same principles as the Elcometer 3000 Manual Clemen Unit, the motor brings the tool gently in contact with the sample, whatever the load, variable from 0 to 5000g (176.4oz), moves across the coating and then gently lifts it with the automatic Start/Stop function.
The contact of the tool with the metallic substrate is indicated by a lamp and voltmeter. This unit has a significant benefit over the manual version as more repeatable and reproducible results can be obtained due to the uniformity of both speed and movement.
Technical Specification:
Part Number
|
Description |
| K0003000M003 |
Elcometer 3000 Motorised Clemen Unit (UK240V/EUR 220 V) |
| K0US3000M003 |
Elcometer 3000 Motorised Clemen Unit (US 110 V) |
| Dimensions |
Motorised: 460 x 280 x 330mm (18 x 11 x 13") |
| Weight |
Automatic: 20kg (44lb) |
| Certificate available |
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. |
| Packing List |
Elcometer 3000 Motorised Clemen Unit, 1kg (35.27oz) x4 weights, 1mm (0.04") ball tool and operating instructions. |
Can be used in accordance with:
AS/NZS 1580.403.1, BS 3900-E2, DIN 53799, ECCA T12, EN 13523-12, ISO 1518-1:2011, JIS K 5600-5-5
Standards in grey have been superseded but are still recognised in some industries.
Accessories:
| KT003000P021 |
1 mm (0,04") Ball Tool in Tungsten Carbide |
| KT003000N001 |
2 mm (0,08") Cutting Tool in Tungsten Carbide |
| KT003000N013 |
VW Cutting Tool |
| KT003000N002 |
1 cm2 (0,15 inch2) Rubber Tool (to be used as a guide to the dryness of a sample) |
| KT003000N015 |
Adjustment Kit to test from 5 to 20mm (0.02 to 0.8") |
| KT007210M001 |
Illuminated Microscope (x30) |
| KT001546N002 |
Cross Cut Magnifying Glass |
 Download Full Catalog
|
.jpg)