Download Full Catalog
Product Description:
The Elcometer 211, commonly referred to as the “Banana Gauge”, has proven to be a successful coating thickness gauge where the use of electronic instruments is difficult, e.g. inflammable atmospheres in oil and gas production.
The “V” grooved base, rubber feet and clear scale, with its ranges for thicker coatings, make this one of the most popular mechanical gauges in the world.
- Factory calibrated - with user calibration adjustment
- Foils supplied to check calibration on site
- Ideal for cold surfaces and underwater use
- Small and portable with an accuracy ±5%
Technical Specification:
Part Number |
Description |
Range |
A211F--1M |
Elcometer 211 Coating Thickness Gauge |
0 - 1000?m |
A211F--8M |
Elcometer 211 Coating Thickness Gauge |
0.65 - 6mm |
A211F--1E |
Elcometer 211 Coating Thickness Gauge |
0 - 40mils |
A211F--8E |
Elcometer 211 Coating Thickness Gauge |
25 - 250mils |
Accuracy |
±5% of the reading or ±2.5?m/0.1mil (whichever is the greater) |
Substrate Thickness |
0.4mm (16mils) minimum |
Measurement Area |
30mm (1.18”) Diameter minimum |
Measurement Diameter |
20mm (0.8”) minimum |
Edge Effects |
Must be at least 6mm (0.24”) from edge |
Dimensions |
200 x 60 x 30mm (7.8 x 2.4 x 1.2”) |
Certificate available |
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability |
Packing List |
Elcometer 211, calibration foil set, carry pouch, neck harness and operating
instructions |
Can be used in accordance with:
AS 2331.1.3, AS 3894.3-A, ASTM G 12, ASTM B 499, AS/NZS 1580.108.1, BS 5411-11, BS 3900-C5-6A, DIN 50981, ISO 2178,
ISO 2808-6A, ISO 2808-7A, JIS K 5600-1-7, NF T 30-124, SSPC-PA2
Standards in grey have been superseded but are still recognised in some industries.
Download Full Catalog |