| Testing Equipments > Compressive Strength Machine for Mortar Cubes |
List of Cement Testing Equipments
|
Compressive Strength Machine for Mortar Cubes
 |
| Compressive Strength Machine for Mortar Cubes Compressive Strength The failure loads of mortar cubes can vary considerably according to the type of cement and the period of curing. However, a capacity between 50 kN and 500 kN encompasses the majority of test conditions. A 500 KN Compression Testing Machine is suitable for testing mortar cubes, cement mortar and pozzolana cubes of 50 mm. For details see under ML – 121, ML – 125. ML - 202 Flexural Strength 4 kN Flexure strength Testing Machine, Electrically Operated, IS: 1727, 4031 For the Transverse test of pozzolana and cement mortar prisms (Rilem Cembureau test) by single point loading of a 60 mm long prism supported at 100 mm centers. Smaller loads, less than 10 N, can be applied and measured with an accuracy of 1% in the upper four-fifths of the range. The load is increased at the rate of 40- 60 N/sec. Supplied complete with: Proving ring of capacity 4KN and Flexure Test Attachment. |
