|
|
New No.3, Appaiar Lane, Second Floor,
Royapuram, Chennai - 600 013, Tamilnadu, India
Email - , Phone - +9144 25984175, Mobile - +91 94441 62346
|
|
|
|
|
| |
| Ion Analyser,
pH
Analyser, pH
Meter-I, pH
Meter-II, pH
Meter-III, pH
Meter-IV, EC-TDS
Analyser, Conductivity
Bridge, Conductivity
Analyser, Water
Quality Analyser-I, Water
Quality Analyser-I, DC
Recording Polarograph, Potentiostat
/ Galvanostat, Pulse
Polarograph, Dissolved
Oxygen Analyser, Flame
Photometer-I, Flame
Photometer-II, Flame
Photometer-III, Flame
Photometer-IV, Nephelometer
|
Ion Analyser - Features
|
|
Microprocessor Based, with Printer
Interface. |
| Direct Measurement of pX (Activity),
pH, EMF, Concentration & Temperature. |
| Analyses - by Direct & Incremental
(Standard & Analate Addition & Subtraction) Methods. |
| Simultaneous LCD of 3 Parameters -- pX,
pH, EMF in mV, Concentration in 4 Different Units & Temp.
in °C. |
| Programmable Calibration up to Six
Points with Memory Back-up. |
| Automatic Temperature Compensation,
Slope Correction & Asymmetric Potential Correction for pH |
| Useful for Oxidation Reduction Potential
(ORP or REDOX) Measurements Manually |
Application - For analysis of various ions in water and
a variety of aqueous and non-aqueous solutions used in
|
|
Acquaculture, Agriculture, Fertilizer & Soil
Testing |
|
|
Food, Dairy, Beverage, Breweries & Distilleries |
|
|
Sugar, Pharmaceutical, Textile, Glass, Chemical
& Other Industries |
|
|
Bio-Medical & Clinical Laboratories |
|
|
Corrosion, Pickling, Electroplating, Photo Engraving,
Anodizing & Polishing Processes |
|
|
Power Plants & Effluents |
|
|
Geology, Mining etc. |
Specification
| Mode |
Range |
Accuracy |
Resolution |
| pH |
0 to 14 |
±0.01 |
0.001 |
| pX (Activity) |
-2 to +20 |
-(1) |
0.001 |
| mV |
± 2000 |
±1 |
0.1 |
| Temp.°C |
0 to 100 |
±0.2 |
0.1 |
| Concentration M |
10 -9 to 10 0 |
- |
- |
INPUT |
| Impedance |
>1013
Ohm 25°C |
| Receptacle Type |
BNC (3 Nos) |
| Temperature Compensation |
0 to 100°C Auto/Manual display |
| Readout |
16 x 2 Dot Matrix LCD with 4.04 mm x 7.76 mm size
characters |
| Power Requirement |
230 V ±10%, 50 Hz, single phase |
| Physical Dimensions |
Instrument |
Stirrer |
| Size (W x D x H) in mm |
350 x 250 x 150 |
150 x 65 x 100 (2) |
| Weight in kg. |
Approx. 5 |
Approx. 0.7 |
Accessories Supplied
With Instrument |
Stirrer GI 631 with Electrode stand & holding
clamp and Stirring capsule, Buffer Tablets & Polythene bottles. |
| At Extra Cost |
Ion Selective Electrodes & Corresponding
Standard solutions Background electrolytes or Ionic strength
adjustors, Reference Electrodes: Single or double junction,
Reference Electrode for Fluoride, Temperature Probe Glass
pH Electrodes & Reference Electrodes or Combination pH
Electrodes, Glass pH, Metallic Platinum & Silver and Calomel
Reference Electrodes for End point detection in Titration
|
| (1) Depending
on the standards |
| (2) Excluding 290 mm long
electrode stand |
Specifications subject to change due to continuous development
|
|
| |
|
|
|